ISO 9001 certified quality system
Single-Use Instruments
Operating Tables & Positioning
Imaging & Pain Management Tables
Medical & Emergency Carts
Patient Warming & Cooling
Patient Transfer & Transport
Surgical Tourniquets
Subcutaneous Infusion Systems
Infection Control Dispensers
Theatre Support
Samarit Rollbord Patient Sliders
No-lift lateral transfer boards for sliding patients between bed, trolley and table.
QA3 Patient Transport Stretcher
Low-height hydraulic stretcher for patient transport, examination and recovery, up to 320 kg.
- Height 475 to 775 mm (excluding mattress), adjusted by pedals on both sides
- Vertically operated side rails that store under the mattress
- Fifth-wheel steering for one-person handling
- Gas-assisted backrest and Trendelenburg tilt to −12°
- Maximum patient weight 320 kg
- Latex-free, body-moulding foam pressure care mattress
Overview
The Anetic Aid QA3 Patient Stretcher is a compact hydraulic trolley for moving patients in and around the hospital, and for examination and intubation in theatre and clinical areas. Its low minimum height of 475 mm (excluding the mattress) makes it easier for patients, particularly frail and elderly patients, to get on and off.
Side rails operate vertically and store away under the mattress, leaving almost no gap for lateral transfers. Fifth-wheel steering lets one person guide the stretcher, and pedals on both sides raise and lower it. The backrest is gas-assisted, Trendelenburg tilt reaches −12° even at the lowest height, and a quick-release transfusion pole stores in the side rail.
The QA3 comes with a latex-free, body-moulding foam pressure care mattress and carries patients up to 320 kg. Build options include foot-end pushing handles, oxygen cylinder brackets, X-ray tray guides, department ID and an extended bariatric platform.
Information is for healthcare professionals. Always read the instructions for use supplied with the product.
At a glance
| Manufacturer | Anetic Aid (UK) |
|---|---|
| Product code | 21110 |
| Height | 475–775 mm (excluding mattress) |
| Length | 1700–2150 mm |
| Overall width | 805 mm |
| Weight | 128 kg |
| Max patient weight | 320 kg |
| Backrest | 0 to +90° |
| Trendelenburg | 0 to −12° |
| Mattress | 2025 × 700 × 90 mm |
| Castors | 150 mm, central total lock |
Often ordered with
Samarit Curved “Banana” Sliding Board
Curved Glideboard for seated transfers between wheelchair, car seat and chair.
Ordering codes
Quote these codes on your order or purchase order. Not sure which you need? Ask us.
| Code | Description | Pack | Quote list |
|---|---|---|---|
| 21110 | QA3 patient stretcher with pressure care mattress | Each |
See it in use
A video from the manufacturer: The evolution of the QA3 patient stretcher.
Book a video demoTalk to us
Speak with a product specialist
Questions about a product, pricing or availability? Send a quick note and we'll come back to you within two business days, usually sooner.
- Freecall within Australia1800 77 51 51
- Emailsupport@
medicaldevices.com.au - See it in actionBook a 20-minute video demo